Skip to main content

Hi All, Scored some side mirrors. Can someone tell me the best glue to use to mount mirrors on the window, and whats the best kinda plate to mount the mirror on perspex ? Any other useful info to do this is greatly appreciated. A full rundown would be appreciated of what you`ve done would be helpful. Photos of my mirrors and mounts below . The existing mounts shape is smaller than window so there`s a gap.

IMG_20220722_130844

IMG_20220722_130943

Attachments

Images (2)
  • IMG_20220722_130844
  • IMG_20220722_130943
Last edited by Kiwi1972Pantera
Original Post

Before actually mounting the mirrors permanently I think it might be wise to temporarily attach them using some tape just to confirm that they can provide the adjustment necessary to be fully functional.

owners have used various glues to attach directly to glass. It should not be necessary to physically scratch the glass surface for increased adhesion, as some owners have done.

I believe others have used double-sided automotive trim tape

others have mounted the mirror base to a thin sheet of metal, correctly shaped to slide underneath the rubber gasket of the door “vent” window

The backside of the mirror mount plates as shown in your photographs do not offer very much flat area to meet with the window glass or a flat metal piece

I would explore how to provide a better glue-friendly surface to the mount plates

ideas that come to mind are gluing a properly sized sheet of plastic to the base, or fill in the backside of the mount base with a resin/plastic product to create a flat surface

Hope this helps a little,

Larry

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×