I am ready to attach the foam and headliner material to the fiberglass side bows and need to get some tips on how to do that. I've used the old pieces of headliner as templates to cut out the new foam and separate headliner material purchased from one of our vendors. I know the old headliner was attached by gluing an edge to the back edge of the bow but would like to talk to someone who has done it. Thanks.
Replies sorted oldest to newest
Sent you a PM with my phone number.
I've reinstalled my original headliner and upgraded the foam. It's been a while but I can try and walk you through it.
There are a few different techniques so hopefully others will chime in here.
John
#3590
I used ~3" (81mm) magnets from Harbor Freight to hold everything in place while I smooth out any wrinkles. If doing it again I would have doubled the amount of magnets.
I seem to remember needing an extra set of hands to pass the headliner inside the car.
John
#3590
