Skip to main content

Replies sorted oldest to newest

I believe that the part number of the grommet that I used is 113-611-817A.  It's listed as: 

VWC-113-611-817-A - BRAKE MASTER CYLINDER RUBBER PLUG - SECURES INLET PIPE TO CYL.- MEASURES 11MM INLET / 24MM O.S. DIA. - BEETLE 72-79/GHIA 72-74/ THING 73-74 / VANAGON 80-91

These grommets were a very tight fit.  I used brake fluid on the grommets as a lubricant, placed a block of wood on top of the reservoir, and used a c-clamp to compress.  Carefully tighten the c-clamp and wait a few hours or over night.  Carefully tighten the c-clamp again and wait.   Repeat as necessary.  

John

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×