I see Wilkinson has come out with a very reasonably priced axle nut tool
if you have a need for such a tool, but want to save some money, please remember I have such a tool that I will gladly loan to anyone who asks
Larry
Original Post
Replies sorted oldest to newest
Is that for removing the rear hubs?
Yup.
Hello
what is the correct decryption on that Nut any information searched the internet couldn't find the right size
regards Ulli
From Wilkinson's website:
01213A - NUT LH AXLE "S"
Part #: 01213A
$ 20.65 USD
01212A - NUT RH AXLE "D"
$ 20.65hi Everyone
That I know thanks for this info but what I tried to ask is the size of the actual tool I bought a so called KM 7 but unfortunately the KM 7 is not properly fitting the slots of the nut they are just a few .10 th of a millimetre in the slots and that's not enough for 400NM.
Ulli
Ulli,
Sorry can't remember who sent me this link below. I didn't buy one from this company so you probably want to do some research first.
TMFS 7 - Locknut sockets | SKF
Attachments
Images (2)
Thanks for the info that is really great, a bit expensive but know we know what to look for.
best regards Ulli
Ulli,
I would be very willing to act as your agent and purchase the tool from Wilkinson and ship it to you in Germany. I have shipped overseas many times and would do so at my cost.
Or you can make the purchase directly and have Wilkinson send it to me
Let me know if you would like to accept my offer.
Larry