Skip to main content

Replies sorted oldest to newest

Looking for a real project.  There was one offered on this forum in December that was a rusted tear down, that would beck good start.  I have built (from scratch) several cars in the past few years that required significant welding and fabrication.  That is what I like doing.  I have always liked Pantera’s and this will be my last build, at least that’s what I told my wife 😀

I may have one for you. It's a number matching 72 1/2. Rust up front in the normal places. The U-joints gave way and battered the inner rear panels. I do have replacement panels. There may be some rust in the bottom of the doors. Ran fine until the rust in the tank went through the fuel system and plugged the carb so it would run for a while and then die. It is all apart currently. I have the POR-15 kit for the tank and just need to finish getting the coating inside. Replaced rear bearings while the new larger ones that Wilkinson offers.

Not seeing the dm



@haydude posted:

I may have one for you. It's a number matching 72 1/2. Rust up front in the normal places. The U-joints gave way and battered the inner rear panels. I do have replacement panels. There may be some rust in the bottom of the doors. Ran fine until the rust in the tank went through the fuel system and plugged the carb so it would run for a while and then die. It is all apart currently. I have the POR-15 kit for the tank and just need to finish getting the coating inside. Replaced rear bearings while the new larger ones that Wilkinson offers.

Sound interesting my cell 7144270194. Shoot me a text

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×