Modified condenser cover ?

this is not an Original condensor grille
because you also have 180 degrees headers you must made one yourself .
Simon

Poor picture... Can't make out any detail. BUT, it looks like a modified condenser cover cut for 180-degree header exhaust to exit.

I know - sorry. I cutted out from a video.. may this is better

Simon - I should contacting you first before I post such questions here. You confirm my concerns.. but I am not willing to vandalize an OEM part for this. So I have to check who is may able to build such a piece. Same for my biggest wish - a rear diffuser like the GT (40). Christmas is right around the corner so who knows.

Where is your old one?
Have Willy still this?
Otherwise I must look if I have a spare one.
I see they also come up on Ebay ,otherwise Kirk Evans or Mike Mayberry?

I have my one here but not really willing to cut an OEM part for it. Add. I need to find our where I can find some ring-covers

Ring covers?

I meant the black rings inside the grill. I have to check where I can find some for getting an OEM look like shown on the photo.

What size are your pipes and what is the center to center measurement?


Ron

pipes are 8,5 cm each = 3,4 inches with a 3cm = 1,2 inches 'gap' but need to center to center measurement.

Here a photo

center to center = gap + 2 radiuses
c-c = 3cm + 8,5cm
c-c = 11,5 cm (4.53")

are the pipes coming out of the grill screen at a 90 degree angle? the angle off of 90 will make the exit holes oval

Thanks for clarification. You are right