Need alignment specs...

...Mike, I can give you the specs (soon to follow), But unless you are still running the 'Stock' size rims and tires; the original factory specs are almost useless. When running those 'Steamroller' size tires, the 'toe-in' and 'toe-out' is always different. However you may want them only as a starting point for your Alignment Shop to calculate from. I'll grab the manual and send them along shortly...

...All degrees are Positive. Front wheel caster angle= 2 degrees 40 minutes. Kingpin Front wheel= 8 degrees. Front wheel Camber= 0 degrees + or - 8 minutes. Front wheel Toe-In= 1/8" (1/8 inch). REAR wheel Camber(negative)= 0 degrees 30 minutes + or - 8 minutes. REAR wheel Toe-In= 1/8" to 3/16" (1/8 inch to 3/16 inch). That is all...

... When running those 'Steamroller' size tires, the 'toe-in' and 'toe-out' is always different...

Let's see the wheels on the car Mike.

quote:

Originally posted by mooso:
I went to two shops to get a front alignment and neither could find specs in their data base for a Pantera. Not to mention, I couldn't get my car up on their racks anyway!
I have a service manual, but it is pretty basic. No alignment specs, no wiring schematic, etc.
My car's a '72. Can I get a better manual? Does someone have the alignment specs?
Thanks, Mooso.

Thanks guys! I knew ya'all would come through.
Coz, I'll try, but I'm computer illiterate. I have no idea how to post a photo. We have a digital camera, so I guess it's about time I learn.
Thanks again, Mooso.

I printed what jack said, and will stay positive. I need any info on a anti bump steer kit. HY 40 from TENN to asheville is wild ride!!