Skip to main content

Got tired of the factory inaccurate gauges. Eyeballing the the temp gauge has caused my right eye to look down and right while my left eye looks straight all the time, not an attractive look for me and some say that's the least of your problems. Anyways I went with Colbalt digital, very nice. I changed the amp gauge to voltage and the fuel is in percent. Here is a picture, not very good I will post a better one once I get a good camera.
Original Post

Replies sorted oldest to newest

These are from Autometer, Colbalt series. The fuel gauge is in percent (%) and will flash when it gets to 10 % fuel in tank. It would have been nice if the rest of the gauges did the same at preset levels. Easy to install and used most of the factory wiring. I only had to run the two wires for the coolant temp sensor through the center counsel. I also changed the amp meter to volts, but they do have an amp meter gauge.
I can't remember exactly what I paid, but it's around the $450 mark
http://www.autometer.com/cat_gaugeop.aspx?sid=69
quote:
Originally posted by Derrick:
Here is a better picture. Turnings lights on reduce the brightness and the gauge type lights up. The wires hanging are for gauge calibration and will be hidden when done.
Richard, I can't fit Pocono in my schedule this year, but Niagara and Kingston should be a go..


Is that radio a Secret Audio unit?
Yes it is. I am not happy with the location as it is tilted away from view and cannot read the display. I may relocate it to where the ashtray is as it is close to that size. I also mounted everything in the trunk and opted for the USB adapter and have all my fav music on a memory stick and don't need any CD's.
Post
×
×
×
×
Link copied to your clipboard.
×