Skip to main content

i have bought a project! i need ; clutch slave /brkt /link.
oil/temp senders
90 speedo drive
zf -2 side mounts l/r
engine deck lid
clutch recommendation @435hp
3 - nut plates for rear storage hold down screws
what do these screws look like?
dip stick tube
throttle linkage on the motor/ cables is 6-8 " short
info on cooling system / a/c w /180 headers
thanks wade E or 520 869 9663
Original Post
Congradulations Wade! Welcome and here are a few ideas. Oil and pressure sending units are available from BK Graham 714-283-3926 PI motorsports carries the side mounts( find them on this site) they host it!..Hall Pantera 562-531-2629 Gary and Bevrly know their Panteras. They supplied my clutch made by Centerforce. Some other people use Mcleod clutches, he also knows Panteras. There is a throttle cable on ebay right now.ZF side mounts come in a couple of styles. I bought mune from PI. They are simple fabricated units. The sending units may be the same as boss mustang. Is Lizzard rock near Phienox? 180 Degree headers require A/C condenser moved to the front of the radiator or under a rear fender well, I have not seen it done. You have to check out Panteraplace.com A plethora of Pantera info. Keep us informed! Bill
Post
×
×
×
×
Link copied to your clipboard.
×