New Radiator Install

griffinmaxMember

Hi all.

Getting ready to install my new brass radiator from Precision Proformance. The radiator comes with new bleeder valves and fan sensors. My question is do you think I should install the valves & sensors using teflon tape, a little dab of RTV or nothing at all?

Thanks.

-Andy

11/12/115:15 PM

❤️ 0

Original Post

Replies sorted oldest to newest

crxmanMember

do not use RTV on the threads.use teflon tape or the liquid teflon .what radiator did it have in it? are you replacing the fans also

11/12/115:58 PM

❤️ 0

griffinmaxMember

Good. I like the teflon tape. It had the original radiator. It has "newer" meriah fans. I'm changing to all SS pipes, Edelbrock water pump and going to run a Tefba coolant filter in hopes of keeping the new radiator clean.

-Andy

11/12/116:23 PM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...