NWPantera and airflow

thanks for finding that info.    Now, what is the conclusion? (which way)

from the looks of it either way, the fan motor will overcome the pressure difference or turbulence, but if you have the tub in, you want to be blowing out at any speed.

That’s funny… I’m looking into the airflow  In multiple areas of the Pantera as well … trying to do the obvious first and get rid of the washing machine action behind the rear window cut out… The Louvers should help you that… I assume it should smooth out the airflow and make it an extraction point only… obviously, everything needs to be tested with strings attached, blah blah blah blah blah we will see…

the yarn is the way to go, not sure why he used plastic as it has a bias to lay flat

IF I EVERY get 5177 back (and reliable) my plans are to take "pressure" measurements for the radiator and the rear AC condensor.

I stumble across this guy that seems to take the "measure is to know" approach for aerodymanics

https://www.youtube.com/@JulianEdgar

i have a meter that takes 4 k sensors i have two air and two pipe style, i’ll test at different speeds and log info, i also have an anemometer for CFM

anyome know the GPM of the water pump? i’m going to compare the oil cooler to the radiator