Pedal Box Install issues

I just went through that exercise last month.  I've done it many times over the years and I am always trying to remember how.  I have never accomplished the task with the clutch master attached.

I do it with the clutch master and accelerator pedal removed.

I insert the clutch pedal side first

I have a friend depress the clutch pedal to clear the linkage on the opposite side. Absent a buddy, perhaps a zip tie can hold the clutch pedal depressed.

You will have just enough clearance on the passenger side of the unit to permit it to barely slip in. Rubber mallet may help.

JT

Trimming the pedal box just a bit makes getting the pedal plate in and out a snap.

Here is a rough layout of the mod as I received it. Quick work with a die grinder. completely concealed after everything back together.

@larryw posted:

Trimming the pedal box just a bit makes getting the pedal plate in and out a snap.

Here is a rough layout of the mod as I received it. Quick work with a die grinder. completely concealed after everything back together.

Larry, I have seen that ,

Do you think the removal of the reduction kit and Clutch mast will be required?

Jerry

@jtpantera posted:

I just went through that exercise last month.  I've done it many times over the years and I am always trying to remember how.  I have never accomplished the task with the clutch master attached.

I do it with the clutch master and accelerator pedal removed.

I insert the clutch pedal side first

I have a friend depress the clutch pedal to clear the linkage on the opposite side. Absent a buddy, perhaps a zip tie can hold the clutch pedal depressed.

You will have just enough clearance on the passenger side of the unit to permit it to barely slip in. Rubber mallet may help.

JT

Thank you for your detailed explanation.  I was hopeing to spare myself vertigoupsidedowntime 😵‍💫 thou I may not be able to.

Jerry