Has anyone used the PIM 3 finger clutch on a big HP motor?
I just smoked a new Centerforce diaphram type clutch. I beleive the CF is not strong enough.
Will
Original Post
Replies sorted oldest to newest
WIll,
This is what I have in my GT40 with BIG HP.
http://www.summitracing.com/parts/MCL-6911-03/
It works amazingly well!
Ron
This is what I have in my GT40 with BIG HP.
http://www.summitracing.com/parts/MCL-6911-03/
It works amazingly well!
Ron
Yes I have 550hp held with no problems
I'm sure my HP is around 450 with the new rebuild and the PIM clutch and HD TO bearing work great..
Im using the dual disc from PPC. So far works like a hot damn.
Blaine
Blaine
Will,
I installed the same Mcleod Street Twin disc set up on my new motor from one of the vendors with the aluminum flywheel in one assembly / kit.
Ron
I installed the same Mcleod Street Twin disc set up on my new motor from one of the vendors with the aluminum flywheel in one assembly / kit.
Ron
I have the McLeod street twin and aluminum flywheel as well. It's a nice piece. I got it from Dennis at PPC years ago. He worked with Mcleod wrt to the Pantera specific ZF bell details. Mine was one of the first two he sold and is the Long version not the Diapghram. Holds like a vice but on hot days after a good romping, on occassion the floater plate seems to hang up a bit and make shifting a bit sticky. This can be easily addressed but even though I have plenty of throw, I'll need to pull the engine to make the set up adjustment.
Kelly
Kelly