I have removed the 4 bumpers. Any recommendations on who to use? I searched the forum and found one place in Norfolk, Va. Suggestions?
Original Post
Replies sorted oldest to newest
There's a very good plating shop in Signal Hill California (Long Beach)that's done plating for me and does work for Chip Foose. Their work is impeccable.
http://www.artisticsilverplating.com
(877) 427-0113
(562) 427-0113
http://www.artisticsilverplating.com
(877) 427-0113
(562) 427-0113
If it was Royal Silver, I have used them before and I will tell you they are the best in the country.....and you will pay for it. That company has been in business for a very long time, and if you were to pull into the parking lot you would never know it was a plating shop. They can fix or restore the worst parts. They don't grind the imperfections out they fill the pits! Again they are the best in the country.
Artistic Silver does the same kind of filling pits.....coat, buff off the highs, another coat of plating. I was talking with the owner and he was telling me he did a copper piece off a very very old car, he said he had 20+ coats to fill the pits. It's a lot of work to do it right.