rear upright zerk fitting

garryc15Member

I am rebuilding the rear suspension on my Pantera. What is the best location for zerk fittings on the rear upright, one in the center or one on each end by the bushing.

5/18/0510:34 AM

❤️ 0

Original Post

Replies sorted oldest to newest

huskerMember

One by each bushing, IMHO. Mine are around an inch from the ends, where the flat "rib" comes down.

5/18/054:38 PM

❤️ 0

garryc15Member

Thanks, for the info. Putting the zerks on both ends will give better coverage

5/19/0511:37 AM

❤️ 0

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...