Skip to main content

Closed4 replies

Relay or fuse panel door

V vyprgt2Member
I managed to misplace the screw that holds the carpeted relay panel door shut (it is the same as the screw that holds the fuse panel door shut) on my '74. I ordered a (reportedly) oem replacement from one of the vendors and it is not the same- the replacement is light silver instead of charcoal gray and is much longer (about 1.5 inches long vs. about .75 inch.) Can someone tell me which is the correct one?
Last edited {1}
Original Post

Replies sorted oldest to newest

bosswrenchbosswrenchMember
Mine on 4366 were chromed and fairly long- interchangeable with 2 of the 3 console thumbscrews (one was short). What you might consider is using the longer ones and putting a 1/4" long stand-off under the head of the door screws. This keeps the head out of the upholstered fabric where it tends to sink in, and allows a better grip for fingers.
Views: 100
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×