The original seat track rollers are flattened out and I want to remove them and replace them but I’m not sure how to get them out. I have the track slid as far one way as they will go so one of the rollers is as close to the outside as possible but it seems like I need to get something in there to pull them out but there doesn’t seem to be much room. Any suggestions for how to remove them? Thanks!
Replies sorted oldest to newest
As far as I remember just seperate the two metal pieces and the rollers fall out you can slide them apart if I am not mistaken I did the same with mine and changed the rollers.
Note- there are two different track lengths (built the same) in different years of Panteras, so don't try swapping for 'rebuilt' tracks unless you measure what you have first.
I also believe that you need to flatten that metal tab in the lower track to get the rollers out. I had to do that to separate the upper and lower track sections when replacing my rollers years ago. I replaced my rollers with delron plastic of the same diameter.
The tabs keep the two pieces from rolling apart. Flatten one the remove the wheels. Hall sells 8 brass machined wheels for $125.
Thanks for the replies. So flatten one of the tabs to separate the pieces and then I assume you push the tab back up once it’s put back together?
Yep, that's how I remember doing it. Pretty straightforward
