Snap-On LED light

huskerMember

I found a nice Snap-On shop light in the middle of the street. Unfortunately the charger didn't end up with it. I can't find any information as to what charger it uses. The light model # is ECFBAR300OR. Anybody have any dealings with the Snap-On rep in their area that can point me in the right direction?

8/16/153:45 PM

❤️ 0

Original Post

Replies sorted oldest to newest

jmm3Member

Well, its not mine. The first time I used my rechargable LED worklight was to repair the window rollers in my 69 Mach 1. I did a beautiful job, got everything buttoned up nicely, all the screws right, everything perfect. Then as I turned out the garage lights to go into the house, I noticed a bright shining light illuminating the door glass.

yep.. I left my new LED lamp inside the door because it didnt have a cord on it!

I'll ask my tool guy.

8/18/153:06 PM

❤️ 0

huskerMember

Thanks. Bet you said a few choice words.

8/18/155:55 PM

❤️ 0

bobhudsonMember

Probably most any 120V-12V low MA plugin transformer will work with the correct male plug as I have used a 350 MA on mine not being able to locate the original. I also have an auto cigarette receptacle cable for mine so that is straight 12 V naturally higher amperage.

Bob

9/11/158:04 AM

❤️ 0

huskerMember

Bob,
I was finally able to find one through Snap-On.
Make sure you stop in when you're in the area.

9/11/159:13 AM

❤️ 0

bobhudsonMember

All I need now is to get my new pads on and I will try and come see your car soon.

Bob

9/11/154:53 PM

❤️ 0