Skip to main content

Replies sorted oldest to newest

Very interested in the answer here. I was replacing my slave cylinder and realized there was no spacer. The prior owner had just used a standard bolt to attach the bell housing to the engine. I ordered a spacer from a vendor which measured 2 5/16” but there still appears to be a gap between the bracket and spacer of 1/2”. I am wondering if the spacer from the vendor is too short or some mod has been made to my car. Does anyone have easy access to measure their spacer? Thanks. Shashi

 

 

050888C1-AA16-4149-A6F5-7DEB248FF0D449C2746D-CDB4-4260-BC6D-E0B3F57BE819

Attachments

Images (2)
  • 050888C1-AA16-4149-A6F5-7DEB248FF0D4
  • 49C2746D-CDB4-4260-BC6D-E0B3F57BE819

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×