THanks JAck

Guest

Thanks Jack look forwards to the full story. Can u just fill me in on the radiator part though.
Cheers cj

What i am thinking of is the laid down option with the flex i lite fans. was wondering if this was the way u went.

[This message has been edited by CJ (edited 08-13-2002).]

8/13/023:34 PM

❤️ 0

Original Post

bosswrenchMember

Yes, I did. But....remember, laying down the rad doesn't improve the cooling, it just makes it easier to attach sucker fans (which WILL improve cooling). The right-angle bend on the in & out water tubes needs to be cut off, or extended about 3" to clear the shroud. The dual Flexilites in their shroud are about the best non-custom fan assembly. Be sure you try directly wirng the fans to the battery, as well as through the relays. If it seems the motors run faster when directly wired, there's probably a high-resistence connection somewhere in that circuit. I've also seen fan blades attached backwards to motors. This means that no matter which way they're wired, they don't pull air as hard as possible. Fun...

8/13/028:14 PM

❤️ 0

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...