Skip to main content

I am in need of new brush set for #2636 wiper motor.  A quick search of the forum a yielded no part number or source.

I was wondering how the brushes are held in " apart" until the armature is engaged? The brush end endcap is capped so no access to brushes, Expected to see a spreader inside.

Any help would be greatly appreciated. Jerry Sr

PXL_20231104_180415514

Attachments

Images (1)
  • PXL_20231104_180415514
Original Post

Replies sorted oldest to newest

...Does this answer your question?

The Brushes are Held Back Tied with a piece String, each, compressing the spring with the brush out of the way. Once the Armature is slid in, the String is pulled out. OR, did I mis understand your Question?

Also, if needed, the insulation in between the Commutator contacts...be sure they are cut down deep enough, so as to NOT LIFT UP and prevent the brushes from making contact.

MJ

Last edited by marlinjack
@husker posted:

Do you have a picture of the rest of the assembly? As I recall this may be an XKE motor.

Do you know what year XKE ?  I read XKE motors are used but missed what years.

May as well park as much information as possible in this thread, it may be easier for others to find.

SVG Stafford Vehicle Components is a great source. I will have to browse their website.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×