Re: #2551 Update Cooling System

jwelch68Member

Good morning,

I was finally able to break in the new engine with flat tappet cam yesterday.

It was 107F in the Arizona garage and ran the engine at 2000 RPMS for 20 minutes.

The Ron Davis Rad and Header tank conversion held up well. Coolant temps stayed around 200F, measured with infrared gun on the coolant hoses. No boiling over at any time even after shutting the engine off.

I know this will change with conditions and load but feel confident in the cooling system at this point.

Thanks for all the info on the forum to get me to this point.

John

#2551

8/17/239:55 AM

❤️ 2

Original Post

lf-tp2511Member

Congratulations on a cooling system that definitely appears to be performing quite well

Larry

8/17/2312:10 PM

❤️ 0

Add Reply

Sign In To Reply

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...