OK, A 351c stroker crank has come into my possession. Some swapping of parts ended up with me receiving this 3.85 stroker crank. Appears to have the .002 undersize snout and I understand that Romac makes a 0203-002 that will fit this crank.
Rods are 351w sized, main bearings are 351c sized with the exception of the thrust bearing, it appears to be about .012 wider between the crank thrust surfaces than a 351c crank does. Looks like a 351w thrust bearing width. Does anyone know who makes the thrust bearing for this. To put a 351w wide thrust bearing into a 351c block.
Jake
Original Post