Hi, I was wondering if anyone has or could please post a photo of what the underside of a hood hinge panel looks like. Mine was all dissolved by rust. Thank you for your help.

image

Attachments

Images (1)
Last edited by George P
Original Post

9ACB12C6-0363-4479-8F84-B00C8871DD54 This is a photo of a new old stock piece I no longer have. It is a simple stamping,  outer ends near the hinges are stamped to a different elevation than the center, has a 90° lip formed on one long edge. There are no studs or any other features on the backside. 

Hope this helps. 

Larry 

Attachments

Images (1)
Last edited by lf-tp2511

Mine has a half rusted lip on the backside. Can't tell how long it was when new. I have fabbed the front piece ans the part you and I have shown, but seems to be a bottom part to this under the hinges?

62740DF6-A257-4796-9B0B-8BF6914EDE8309917266-76AE-4878-B8CD-4111ED6EABA8

The front of the hinge panel attaches to the top of the front sheet metal valance.

Study the photos and you will see the screwheads temporarily holding the piece to the valance 

Larry

Attachments

Images (2)
Last edited by George P

Can you please post some photos of what you are working with?

I’m sure I’m not the only one interested in the project you are facing.

Larry 

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×