Front Wheel Hub Cap - need one

I seem to remember Graham has these.

I've read somewhere that the rotors off a 69 or 70 Mustang will fit the Pantera. I would assume that the dust cap would too. Worth a try if nobody else has an answer.

quote:

I've read somewhere that the rotors off a 69 or 70 Mustang will fit the Pantera. I would assume that the dust cap would too. Worth a try if nobody else has an answer.

Rotors and hub (They are now sold as a one piece casting - originals were separate pieces) from 65-67 Mustang are a direct swap into the Pantera. Cheap way to get vented front rotors.

However, the dust cap on the Pantera seems to be an odd ball size. I've heard of someone altering the standard NAPA cap to fit the P-car, but if you want the real deal to fit the original hub correctly, I believe it is a Pantera specific part.

Larry

Correction! It is not the 69-70 rotors but the 65-66 rotors (design change in mid-67 keeps me from including 67) that fit. And no, the dust caps do not interchange! The I.D. bore (only the clearence around the nut) of the stock Pantera rotor is roughly .060" larger than the Mustang, hence they do not interchange. A picture of the new rotor install can be seen here, note the tight clearence.