Does anyone know where I can purchase an airdam like the one in this picture?
Thanks,
Ron
Original Post
Replies sorted oldest to newest
quote:Originally posted by r mccall:
Does anyone know where I can purchase an airdam like the one in this picture?
Thanks,
Ron
Top Car is Mario Casoni's, that is all original GR4 stuff. Hall Pantera had them or RS Corse.
Cheers.
Ron, a couple of the Pantera vendors own molds for making them. Very low volume so I doubt if such would be in stock but they can build-to-order of whatever fabric you specify. One that comes to mind is Larry Stock's Pantera Parts Connection in Carson City, NV, the other is Kirk Evans in N. Ohio.
SURE Doesn't look applicable for street use, "1" speed bump away from shattered fiberglass...Mark
Hall calls it the "Big GT" air dam. You probably will need to wait a week or so to have them make it?
Did anyone else notice the single windshield wiper in the center on the top car? That's similar to the Ford GT40's set up.
I would inquire about having it made out of Duraflex. Here's a reference to the material.
http://www.ebay.com/itm/191158...e=STRK%3AMEBIDX%3AIT
Did anyone else notice the single windshield wiper in the center on the top car? That's similar to the Ford GT40's set up.
I would inquire about having it made out of Duraflex. Here's a reference to the material.
http://www.ebay.com/itm/191158...e=STRK%3AMEBIDX%3AIT
Hall sells a GR4 front spoiler similar but with rectangular headlight cutouts instead of round. Otherwise very similar.
Same as mine look at my avitar pic.
Ron, I can send you more detailed pics of mine, if you like.
Will
Same as mine look at my avitar pic.
Ron, I can send you more detailed pics of mine, if you like.
Will
Please do Will. I have two GT5 airdams. They are definitely different than what I am looking for. Maybe I can modify one? It's worth a try. Looking forward to seeing pics of yours.
Thanks,
Ron
Thanks,
Ron
Here's Will's:
Mark
Mark
Attachments
Images (1)
Another view:
Attachments
Images (1)
quote:Originally posted by Mark Charlton:
Another view:
Side question.
How are these flairs attached?
I don't see any pop rivets.
My fiberglass air dam was pretty rough so I made one out of aluminum.
The nice thing about this is I was able to close up the bottom and back side:
The nice thing about this is I was able to close up the bottom and back side:
quote:Originally posted by agustaboy:
Side question.
How are these flairs attached?
I don't see any pop rivets.
It's not my car, but as I recall, they are bonded (glued) to the body with an epoxy. I've seen this car many times over the years and never seen a crack so it must work well.
Mark
Attachments
Images (1)
