I welded up this home-made camber checker. I used it for setting up my TVR, but it's just as cool for a Pantera. It's set for 15" rims.
The allen bolts are adjustable to level it up - I trued it on a Surface Table at the local college. I got "weld in" nuts from Ace Hardware.
The angle gauge (inclinometer) was about $30 on evilBay.
It's pretty straightforward to make.
Rocky
Replies sorted oldest to newest
Nice Chuck!
Pantera adjustment is good but issue with C2
will try this..
Matthias
Good job Rocky
I'm putting my control arms back on and wondering how to set the camber close enough to drive it to the alignment shop. Should I just put a 2 foot level on the wheel with it in the air or should it be loaded?
I found on my TVR (this may not translate to Panteras) that weight had to be on the wheels for the readings to be correct and consistent.
Nice job. 
