Skip to main content

I welded up this home-made camber checker.  I used it for setting up my TVR, but it's just as cool for a Pantera.  It's set for 15" rims.

The allen bolts are adjustable to level it up - I trued it on a Surface Table at the local college.  I got "weld in" nuts from Ace Hardware.

The angle gauge  (inclinometer) was about $30 on evilBay.

It's pretty straightforward to make.

Rocky

Camber_Gauge [2)image0image1

Attachments

Images (3)
  • image0
  • image1
  • Camber_Gauge (2)
Last edited by rocky
Original Post

Replies sorted oldest to newest

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×