Kodiak Wheel Deal Is Happening at 25% Off

Just awesome Jim!!! Thanks for all of your hard work putting this all together for us. How about a big round of applause for the "Coz"

Lets keep our fingers crossed. I was happy at 10% but at 25% off I might be able to buy some tires.

Coz Id like to be in on this please. David Martin #3048

No problem David. Welcome aboard !
Drop me an e-mail at cozland@cox.net.
I'll bring you up to speed with everything.

quote:

Originally posted by DM:
Coz Id like to be in on this please. David Martin #3048

Jim,

you are the DUKE OF DEALS!

George

Coz, What is the cost of these wheels ? I have an "L" so I may not need extra wide but 17" sounds nice!

Ron

http://kodiakracingwheels.com/prices.html

wheel prices are listed for each wheel
take 25% off total but add for shipping
order must be in by Thursday

Mark & Ron....Correction....
These are Canadian prices. You have to factor in the exchange rate for US dollars then apply the discount. This will be done at the time the order is placed and you will be given your firm price.

As an example of the 25% discount.
8x17 currently priced at $502.95 US dollars, with 25% discount would be $377.21 for each wheel after doing the calculations....which is 1508.84 for a set of 4 of the 8x17's. Wider wheels on the rear will add a few bucks, but not all that much.

There is also shipping to be added on as there would be with anyone you buy from....

Time is getting short guys. All orders need to be in on Thursday otherwise the price increase takes effect on the 1st of January. Daryle is getting hit with a materials price increase and he will be upping the prices 5 to 8% after the first.

If you not sure of your offsets yet, don't worry about that right now, you'll have time to turn them after the first.

Everyone needs to call and get their orders in this week unless you don't care about the price increase that's coming....Help me out here guys....
Daryle Redlin
Kodiak MotorSports
877.856.7311
Tell Daryle your part of the Pantera group Jim Cozzolino put together.

As a side note, the list is very possibly at 14 now.

quote:

Originally posted by Mark Mensen:
http://kodiakracingwheels.com/prices.html

wheel prices are listed for each wheel
take 25% off total but add for shipping
order must be in by Thursday

You know me George, I help where I can.
It's my way of giving back to the Pantera community for all I have gotten out of it from most of those involved over the last 6 years.

What goes around, comes around brother.....
God knows I've needed a break here and there....

quote:

Originally posted by george pence:
Jim,
you are the DUKE OF DEALS!
George

Wow, Coz that's even better, it hadn't even crossed my mind the prices on the web site were CAD$

I will be phoning Daryle tomorrow

Thanks again for all your hard work from a very happy DTBB member I think 14 buyers is testimnony to what a great deal you have pulled together for us.

I can't get my email to work maybe someone can copy and email to all the buyers

I am ordering 17"X8" front with a 5" backspace ( measured from axle flange flat area to the inside lip where the tire seats just like shown on Kodiak worksheet ) add .25" to outside of lip as shown

I am ordering 18"X11" for the rear with a 6" backspace ( measured from axle flange flat area to the inside lip where the tire seats just like shown on Kodiak worksheet) add .25" to outside of lip as shown. I'm only ordering 18" so I can run a special race DOT tire that is sticky otherwise I would stay with 17" all the way around.

A little history, I have had two Panteras both with Hall Pantera wheels 17" X 8" 235/40/17 and 17" X 11" 335/35/17 I think the Hall wheels look great on stock body cars. My first car was lowered and had the fender lips rolled up. The only tire rub I ever had was inside driver side by the footwell on sharp left turn during parking not what I consider a problem and this car was 1973 Pantera open track driven at Vegas it also had Wilwood brakes and aluminum adjustable A arms
see the white car at the link below (you have to be logged in on the PI site)
http://pantera.infopop.cc/eve/forums/a/tpc/f/6450045562/m/5760088593/p/2

My current car is a 71 Pantera all stock, fenders lips are not rolled and stock height.
I have not driven car much but doesn't appear to be any rubbing issues.
I took the Hall Pantera wheels off this car for my off set measurements.
They should be the same as my previous white Pantera

I would not go more than a 6" off set on the rear, see this post on PI board of my rear wheel
(you have to be logged in on the PI site)
http://pantera.infopop.cc/eve/forums/a/tpc/f/6450045562/m/8920037562/p/2

I removed my Hall wheels from my 71 Pantera and the above backspacing was measured according to the Kodiak worksheet

Hope this helps
Mark Mensen

P.S. I'm leaving town in morning if there are any questions regarding my email you may call me at 951-830-2168 cell

Done deal Mark.

[QUOTE]Originally posted by Mark Mensen:
I can't get my email to work maybe someone can copy and email to all the buyers

It might be easier to post it once on the board. I lost my wheel specs after I faxed them to Daryl. I think my wife threw them away during her xmas dinner clean up before the guest come! Anyways I'm going with Cozs' offsets on 17x10 fronts and 18x13 rear for a GT-5 flare.

My pleasure Julian.

quote:

Thanks again for all your hard work from a very happy DTBB member I think 14 buyers is testimnony to what a great deal you have pulled together for us.

That works to Emery. What ever is easiest to share the info.

[QUOTE]Originally posted by hawaii:
It might be easier to post it once on the board.

17"X8" front with a 5" backspace & 18"X11" for the rear with a 6" backspace would that be the correct wheels to order for a 73 "L" ??? I have not time to measure the car ??? Stock bodied ... I could roll the lips ?? I would like to get in on this deal but time is prohibiting me from measuring the car.

Some nice center caps would really put the icing on the cake... Thanks Coz.
Ron

Ron

Hey Guys....
Message from Daryle....
Good Morning Jim,
I have received firm orders from Emery,Robert,and Mark Mensen. I will be in all day but I will be working in the shop a fair bit as well. All of my staff has this week off so I am running the entire show myself. If the rest of the guys could call and leave there number I will keep an eye on the machine and call them back as soon as I see the message. I can then get the orders in and processed before Friday.
Talk to you soon.
Daryle

Also, Daryle informed that the prices on the website have been updated and are reflecting US dollars. So figure what you see less the 25% if everybody gets off their butts and confirms their orders.

Ron, the measurements are not an issue right now, we can get the measurements to Daryle after the 1st. But he needs to order the meterials before Friday to avoid passing on the price increase that's coming.

Come on guys! Just call in your order today and figure out the sizes later. As long as you have it processed on a credit card he will hold your 25% spot. It will take him a while to get set up. Kodiak's toll free number 1-877-856-7311