i have a supply of mangusta parts. let me know what you are looking for and i will see if i have it.please make sure you need the part because i need to drive to my storage bin to look and its 20 miles away. mikedmayberry@hotmail.com
Original Post
Hi do you have original water expansion tank? Mine has been badly repaired in the past and looks a mess.
Thabks Richard
Mike.

Any response to the list I Pm'd you? Maybe it would be good if you listed some of what you have. Thanks,

Mark
Hi Mike, one to add to the list: looking for a set of seat rails, the Alfa Giulia/Giulietta type, NOT the normal Pantera type. Thanks, Nate S.
Pirelli Cintaruto tires, radio delete plate, radio enclosure for later cars, header heat shields, engine compartment weather stripping
Mike,

I have a guy that needs a LH window guide for the door. Any chance??????

This is the one that the window runs up and down on......

Thanks!
Steve
I have one freshly re-chromed too !

Clocks are a bit hard to find but can be found, it is common to a few Ferrari and Alfa.
Dennis: The re chromed piece you mention is the front badge?

Can you send details? gonzalo.develasco@gmail.com

Thank you !!!
quote:
Originally posted by king:
i have a supply of mangusta parts. let me know what you are looking for and i will see if i have it.please make sure you need the part because i need to drive to my storage bin to look and its 20 miles away. mikedmayberry@hotmail.com


Hello - realise this is an old post, but just wondering if you still have any parts available?
sold almost everything. send me what u are looking for and i will see if i have it... mikedmayberry@hotmail.com
quote:
Originally posted by vyprgt2:
Pirelli Cintaruto tires, radio delete plate, radio enclosure for later cars, header heat shields, engine compartment weather stripping
I need header heat shields.
lcc@ceimail.com
quote:
Originally posted by king:
i have a supply of mangusta parts. let me know what you are looking for and i will see if i have it.please make sure you need the part because i need to drive to my storage bin to look and its 20 miles away. mikedmayberry@hotmail.com
I need parking brake parts: Release handle, cables, equalizer lever . I also need header heat shields and aluminum castings used to attach air cleaner paper tubes to bulkhead.
Lee,

The parking brake release handle, if normal under the dash style and not next to the console, comes from the old European "Capri" vintage early 60's. I don't have a picture on this computer, but they can have either a chrome or I believe black handle, with a white plastic release lever.

I have seen them parting these old Capri's out, best to search UK-eBay and related car sites!

The rest of the parts are pretty much hand made from strap steel. We can help you get dimensions etc I'm sure!

Had a gas in Houston at the show!!! Glad to get out before the REAL weather hit!!!
Steve
Hello,
Not sure if you will see this or not but I am looking for a clutch slave cylinder for a 1970 Mangusta? Thanks.
RyGuy,
I'm starting a new post under "Goose Clutch Slave Cylinder" in the Mangusta Tech section for you!

Ciao!
Steve

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×