MSD ignition

Hey kpsc, you can get the MSD cap and rotor for the chevy, this setup removes the cap spacer the MSD has on the Ford setups, and its way smaller. Just remove the stock cap and rotor, install the new one they use turn type fastners, rewire and its done. I needed to do this on my old Ranchero with the 351 for air cleaner clearance. I think when I did it the cost was under $50.
Jeff

Jeff are you saying that I can keep the billet MSD distributor and just change the cap? Are u sure the ford distributor will work with a chevy cap and rotor? I thought the gears inside or something else was different between ford and chevy. ed

I did it, I seem to remember you have to drill out the fastners for the original cap, but the chevy cap and rotor fit right on it. Just give MSD a call they can give you the correct part numbers for this swap, the guy at the parts store I was dealing with turned me on to this mod saying alot of Mustang guys did it. I still have the original cap in the garage. I sold so much 351 stuff before we got 1717, and now I wish I still had it all.Here is the number and address of the place that turned me on to the smaller cap.
Ramchargers Performance Connection
4764 Dixie Highway, Waterford, MI 48329
phone (248)-673-3400

Jeff

Thanks Jeff I will call them in the morning ed

How did it all go Ed??
Jeff