Pantera Embossed Aluminum Air Cleaner

Another

Adams -

I have the same setup. Could you do me a favor, and measure the top and bottom diameters of the K&N Filter?

Mine is tapered, and it seems like it is a little smaller than it should be. I want to find out if my parts are the same as what you have, or if my filter is not optimal.

Thanks -

Rocky

PS> I would buy it if I didn't have the exact same setup!

Rocky, yes mine tapers too, 13 1/4" bottom and 12 7/8" top (assuming it tapers toward the top). So this must be the correct K&N for this application.

Putting a bunch of stuff on ebay, will probably include this just to get things gone. I'm tripping over things! Very few Pantera bits though.

http://www.ebay.com/itm/291691...id=p3984.m1555.l2649

i would be interested in any pantera parts you have including the air cleaner. could you email me what you have and a package deal thanks, mike....mikedmayberry@hotmail.com

My filter is 12 3/4" at the bottom, and 12 1/4" at the top....

I feel so inadequate....

Rocky

Curious - Does the base of yours have a 90* elbow for a crankcase breather? (Not to be a show-off...)

quote:

Originally posted by Rocky:
My filter is 12 3/4" at the bottom, and 12 1/4" at the top....

I feel so inadequate....

Rocky

Curious - Does the base of yours have a 90* elbow for a crankcase breather? (Not to be a show-off...)

The base of my what? Hey, is this one of those 'adult sites'?

The base of the stamped plate.

Actually, it's just a fitting for a crankcase breather. See it there under the dipstick?

I THINK those bases are just "aftermarket/speed shop" Chevy "L88" bases?

I'm pretty sure I have one around here somewhere? It's a "punch out" I believe and you have a two bolt set up that just bolts your nipple on?

Tapered filter? No wonder mine never fit right

Though my filter is tapered and was bought for the car, I really don't understand the 'need' for it to taper. It also rests about a half inch inside the housing lip, so not exactly perfect there, yet it does compress under the screen.

MikeMayberry - I included literally thousands in parts when my car sold but I have a few bits, namely -

1) 6 super clean, refinished, 7" wheels. All later version. $100 each or all for $500.
2) Pantera tool bag, new, built from identical pattern to OEM. $100.
3) Shift knob, OEM
4) Stainless door strikers (inside jamb, whatever those are.) $50pr
5) Becker Europa, VERTICAL DIAL. ($600)

And about 8 boxes of Jaguar E type, Series 1 parts
And a Ferrari 512BB rear clamshell
And 2 Porsche 911 Carrera/SC front fenders
And about 20 more boxes of stuff that somehow followed me home.

Will look for other Pantera parts as I trudge my way through the recesses of the garage.

Ford GT duffel/document bag, new
Ford GT warranty book pouch, new
Ford GT handmade center console.

Okay, I'll wait til I get a complete list. Anything on here, PM me.

i will take 2 wheels and tool bag if that works for you. please send me a email to mikedmayberry@hotmail.com i can pay thru paypal. thanks, mike.....also interested in what ever you find later...

quote:

Originally posted by king:
i will take 2 wheels and tool bag if that works for you. please send me a email to mikedmayberry@hotmail.com i can pay thru paypal. thanks, mike.....also interested in what ever you find later...

I'm sorry, with every purchase you must also buy a box of unidentifiable Jaguar parts. Forgot to put that in the ad.

Kidding. You got it. Will be moving some stuff around this weekend and get back to you.

You - or whomever snags these other wheels - is going to be very happy. They were properly cleaned, sealed, annealed, resprayed in a micron fine silver, re cleared. These are not the normal scruffy wheels you see.

I realize this only proves my current state of dysfunction, but I'd also sell or trade the E type toward a Z8, possibly a 993tt.

Hi Adams:
I'll take (2) of the 7" wheels. I'll send you a PM with my info.

Thanks!
Gary

I'll take the last two 7" wheels if they're still available, PM to follow. Thanks, Kirk

I would like to purchase your radio if it is stillfor sale ...Thank you Russ Hook

Hi, I did PM you yesterday about the radio, have you had chance to read it. Thanks Richard.

Did not receive it.......sorry

Thanks Rocky and sorry Russ, I replied to the wrong person, oops!

Hey guys, sorry I was involved in a long project yesterday - I imagine that - and unable to reply.

GOO9E I did get your PM, plus two more offers on the Becker, apparently a popular piece.

Thanks for those who want the wheels; all are now spoken for with a backup offer should anyone falter.

Gone too is the tool bag and whatever else it was that Mike wanted.

I'll send an email and/or PayPal for the bits that are spoken for.

Does anyone out there need the rear clamshell for a 512BBi? Did I mention several boxes of E type parts?

Thanks, will respond to PMs once I fully wake up, which some say never quite happens.

PM sent regarding those E type parts.

Thanks folks. All 6 wheels went out yesterday UPS. Presumably you got a confirmation.

Tool bag sent included in wheel box.

Air cleaner sent.

Becker has about 10% chance of going out today. The ladies only work til noon and I'm so lazy I only go in 3 days a week. Sorry about that. Will go out soon as I can get it out.

Ford GT duffel, Ford GT console (fits ONLY the 05-06 cars, not kits, repros, 60's cars) and 10k Jaguar parts still available. Will run those in several separate ebay listings.

Thanks again Pantera people. Hope you love your stuff!

Hi Adams:
The wheels arrived on Friday, and they look great! Thanks for the excellent packing job!

If you come across (2) 8" wheels in your garage someplace, please let me know.

Gary