Pantera parts!!

I'll take some nice weather and some time

See you in the Spring Ron - have a great Chrsitmas!

Billy
#3382

quote:

Originally posted by Plankton:
I'll take some nice weather and some time

See you in the Spring Ron - have a great Chrsitmas!

Billy
#3382

I wish I could help you out with that!

Do you have your "spring time modifications " list together yet???

Merry Christmas!

Ron

Do you have the aluminum trim pieces that go around the rear decklid opening on a '71?

quote:

Originally posted by Husker:
Do you have the aluminum trim pieces that go around the rear decklid opening on a '71?

Are you talking about the "Gills" on the quarter panels behind the rear 1/4 window?
If you are, I have several. Early and late.

Let me know if that is what you are looking for.

Thanks,
Ron

if you have windscreen wiper grilles and a pair of rear quarter windows i would be interested

I have two sets of each of those items!
Which wiper grills do you need? (what side does the wiper "park" on?)
DO you want quarter windows with polished SS or blacked out?

Thanks,
Ron

Ron,
No,not the gills. These pieces go around the front opening of the decklid.

quote:

Originally posted by Dradprice3:
if you have windscreen wiper grilles and a pair of rear quarter windows i would be interested

On the wiper grilles there are two styles, make sure you get the right years depending on whether you have right or left side parking wipers.

quote:

Originally posted by Husker:
Ron,
No,not the gills. These pieces go around the front opening of the decklid.

I have never seen any chrome trim on the deckid opening, only the rubber style waeatherstrip trim, are you sure this isn't an aftermarket addition? The auto stores sell chrome style edge trim in rolls.

Julian

quote:

On the wiper grilles there are two styles, make sure you get the right years depending on whether you have right or left side parking wipers.

The wiper grilles on 71's attach with screws. Later ones do not have screws.

quote:

I have never seen any chrome trim on the deckid opening, only the rubber style waeatherstrip trim

Trim for the 71 is metal, painted black (the 3 thin pieces shown in the pic). Later cars had the nonmetallic(?) push-on trim.

John

I'm looking for a set of front bumpers - early 71 style, square corners, non-wrap around.

Kristian

Im also after a pair of front bumpers for a 72 also non wrap around.
Regards Paul

Ron, I am looking for rear bumpers, Ghia badge, and metal engine cover (square bubble - for interior). Please let me know if you have any of these parts. Thanks, Steve

I will check tomorrow to see if I have these parts.
I know I have a few early bumpers and for sure have the engine cover "bubble" (I have two).

Thanks,
Ron

quote:

Originally posted by jb1490:

quote:

On the wiper grilles there are two styles, make sure you get the right years depending on whether you have right or left side parking wipers.

The wiper grilles on 71's attach with screws. Later ones do not have screws.

quote:

I have never seen any chrome trim on the deckid opening, only the rubber style waeatherstrip trim

Trim for the 71 is metal, painted black (the 3 thin pieces shown in the pic). Later cars had the nonmetallic(?) push-on trim.

John

Actually, my car is a '71 and has the push in style grills. I think only the early '71s had the grills that were held on with screws.
I have two sets of the later style grills but I need to know what version Dradprice3 needs.
I don't have any of the trim for the rear deck lid opening. Sorry.

Thanks,
Ron

quote:

Actually, my car is a '71 and has the push in style grills. I think only the early '71s had the grills that were held on with screws.

Interesting. My sn is 1490. What is yours? Does yours have the silver "stripes"? FWIW, the parts book shows 71/ as having screws.

John

Mine is 1889.No silver stripes.

Ron

I have just verified a sn in the low 2200's as having screws.

The silver stripes were only on the '71's, and most have been painted over.

John

Hey Ron you have a single pod dash?

I have a aftermarket fiberglass dash/gauge section/kick panels,console set . It would have to be covered with leather or whatever you wanted to cover it in but it is very robust and looks to have been molded off of an original dash.

ROn

Ron, do you have any of the following:
1. Rear bumpers
2. Ghia badges
3. Engine cover - square metal bubble for the interior

Thanks, Steve

Steve,
I have #2 and #3 but the only rear bumpers that I have are fiberglass versions of the Euro rear bumpers.

Ron

Ron, I sent you a PM.

Ron,

Also sent you a PM. Do you have any sugar scoops and any additional bumperettes (front and rear)?

Ron, sorry for using your site. I wasnt sure if it was for everyone or just yours. Never meant to butt into your business. have a Happy New Years, mike mayberry....

quote:

Originally posted by king:
Ron, sorry for using your site. I wasnt sure if it was for everyone or just yours. Never meant to butt into your business. have a Happy New Years, mike mayberry....

No worries Mike.


Ron

Here is a list of the parts that I have for sale :As of 1-4-11

1 pr. Pantera doors ( primer ,completely rust free)
14" chrome air cleaner (Summit Racing)
Original air cleaner lid ( Decent shape)
2 Front grills (1 early,1 late)
2 Steering columns ( 1 complete one missing lower shaft,plastic cover etc.)
1 Speedo cable(used ,good shape)
3 rear tag brackets ( 2 w/ broken studs)
2 tag light assy (1 missing lense cover)
1 brake pedal stop
2 red clutch slave lines
1 late seat belt ( rough)
25 sway bar brackets
12 sway bar bushings
1 set of sun visor clips
2 wiper transmissions
Bag of brake caliper spacers
Used suspension bolts
2 pr. sunvisors ( 1 rough, 1 fairly nice)
2 Hall Pantera center consoles ( pretty rough)
1 pr late kick panels ( good shape)
1 York AC compressor
2 emission valves w/ hoses
4 charcoal canisters (2 large,2 small )
1 set aluminum motor mounts
9 motor mount bolts
2 1/4" mount spacers
1 bottom (frame section) motor mount
1 water pump pulley
5 radiator air deflector shields(2 rt,3 lft)
5 front fender splash shields
1 pr 64-66 Mustang defroster ducts ( new in bag)
1 Holley mechanical fuel pump (chrome)
1 windshield wiper motor
3 pr stock tail lights ( one with broken lense)
1 rt tail light
1 pr Dortmund door speakers ( match stock door covering)
1 tail light gasket
1 shift gate ( rough)
1 shift handle ( needs rechromed)
2 tail light lenses (decent shape)
1 pr 1/4 window assy (polished trim and rubber)
1 pr 1/4 window rubber
1 left side 1/4 window ( black trim /rubber)
1 vent window rubber
1 pr 1/4 window trim (polished)
1 rt 1/4 window trim ( primer)
2 pr wiper grills ( wiper hole on rt)(excellent shape)
1 left metal "gill" (14 rib)
4 Rubber boots for shocks
Late (single pod) AC /Heater box (Complete)
Paper hoses for ducts
5 upper rear control arms ( w/ balljoints)
4 urethane control arm bushings /sleeves(new)
2 pr lower front control arms
6 lower rear control arm mounting brackets
5 early fuel filler flanges(3 w/ caps)
2 sets steel radiator tubes ( front by radiator)
1 metal thermostat pipe ( slightly bent)
1 NOS steel tube ( to pressure tank)
1 NOS steel tube (short elbow)
1 steel lower water pump tube elbow
2 steering rack braces
2 battery hold down brackets
1 early relay cover ( with holes in it )
2 stock spreader bars
1 aluminum banjo fitting ( brake booster)
2 gas tank mounting straps
2 windshield wiper arms ( silver)
1 fuel tank vent
1 pr door latches
1 left door latch (rough)
2 door handle mechanism ( 1 nice(no spring) 1 rough(w/spring))
1 horn bracket
3 windshield washer bottle brackets.
2 park brake lever ( under car)
1 firewall bracket ( for coil,voltage reg starter relay etc)
1 pr DeTomaso aluminum valve covers
1 Park brake handle (inside car)
1 pr horns
1 set (4) new chrome exhaust tips
1 rear view mirror & mount
1 NOS exhaust hanger (rubber)
1 windshield washer bottle.
1 brake booster.
1 shifter assy
1 shift rod (w/ adjusters)
2 sets power window regulator assy
2 rt side door glass tracks
1 window motor
3 headlight motor assy ( 1 missing motor)
AC condensor shroud /fan assy
8 steel coil spring retainers
4 rubber spring isolators
6 aluminum spring spacers (4 short,2 tall)
Alt/AC bracket w/ alt and upper bracket
5 "half moon" steel coil spring locks
4 coil springs ( stock)
1 rear L-model bumper shock
1 Edelbrock F351-4V aluminum intake manifold
1 inside door release handle ( left )
1 cast iron brake valve. Sale pending
8 rear deck lid hinges
1 front hood hinge
1 Motorcraft ballast resistor
1 pr weld on brackets for rear splash shields
1 engine bay emissions tag (great shape)
2 rear brake caliper brackets ( bare metal)
1 radiator pressure tank ( bare metal)2 pr radiator fan mount brackets
1 left early (square) front bumperette(primer)
1 left later ( round) front bumperette( black)
1 complete pedal assy( with clutch effort reduction)
3 AC condensor grills ( 1 bent, 2 nice but all missing 1 stud)
1 ignition switch
1 pr cheap GP4 tail light lenses ( black trim)
1 tachometer(w/ harness and plug)
1 Hazzard switch
1 Oil pressure gauge (70 psi)
1 fuel gauge
2 dash light dimmer switches w/ knobs
1 grill crest bezel( rough shape)
1 hood release handle ( rough)
1 dome light switch( nice)
1 decklid striker plate
1 wiper switch (late,bad chrome)
1 pr brake/clutch pedal return springs
1 hood latch/release handle /cable ( very nice)
1 hood latch
Pantera emblem ( rough ,missing stud)
DeTomaso emblem( good shape)
3 Door strikers w/shims
1 pr chrome side mirrors (decent chrome)
1 small plastic trim ring for ignition switch
5 plastic side marker light bezels
2 Aluminum side marker light bezels. Sale pending
2 amber side marker light lenses.
2 red side marker light lenses
1 pr Front turn signal light assys with gaskets (no lenses)
1 pr Front turn signal light assys with gaskets ( decent shape with plugs and lenses)
1 NOS Front turn signal light assy ( No lense or gasket)
1 pr Front turn signal light gaskets (used)
1 pr side marker light lens gaskets (used)
1 door handle key hole ( rough)
1 chrome AC temp control bezel
1 used rear deck bumper
1 set (8) NOS Champion spark plugs (RV 12YC)
1 set Sears Contact points and condenser
1 Rear upright assy (complete)
1 Rear upright assy (bare)
1 early rear transmission mount
1 stock axle w/ flange
4 axle flanges
6 stock halfshafts
2 pr front brake calipers
AC condensor fan/motor (broken blades)
1 Left front brake rotor /spindle assy
1 left front spindle assy ( bent steering arm)
3 steering arms ( 1 left,2 rt)
3 spindles ( 2 left ,1 rt)
1 Alternator (used)
1 NOS nut ( Part # 0051116)
2 sets wheel bearing,nuts,dust caps (used)
1 set NOS dust washers ( Part # D3GY-1180-B)
Various dush shields, spacers,washers (suspension)
1 NOS axle bearing retainer ( part # D3GY-4020-A)
1 pr (2) Koni shocks ( need rebuilt)
2 front brake rotor /hub assy
2 rear brake calipers w/ brackets
Assorted rear brake parts
5 front brake rotor dust shields
2 stock brake fluid reservoirs
1 brake switch fitting
1 Hall Pantera Ignition box (with pigtail connector)
1 pr headlight buckets( primer) chassis # 4006
1 pr headlight buckets ( bare ) chassis # 6714
1 pr headlight buckets/light assy ( yellow)one smashed up a bit) chassis # 6740
1 pr headlight assy (nice)
Misc headlight retainers/brackets/trim rings/gaskets
3 headlight trim rings( 1 nice ,2 rough)
1 steel engine "hump". Sale pending
1 stock radiator
2 gas tank heat shields
3 A-pillar interior trim (black)
2 front interior trim covers(white)
2 side interior trim covers (white)
2 rear interior trim covers ( white)
R&L polished stainless "rain gutters"
1 LOng steel vacuum tube (under car)
Many assorted stainless steel trim pieces for doors/windows (most polished)
3 carpeted fuse panel/relay covers (very nce) (1 rt ,2 left)

The 1/4 window rubber. Is this for the windows in front of the gills? If so, is this new or used?

PM sent.

Thanks,

Mark

Steeve,
I will PM you my grocery list.

Serge

I think I have replied to everyone.

Thanks,
Ron

I also have :
1 space saver spare ( great shape)
1 Set Hall Pantera 180 deg headers/mufflers for 351C w/ SVO "high port" heads ( brand new never installed )
3 sets stock 15" Campi wheels
1 15"X 7" "single slot" Campi wheel ( very nice shape)

Thanks,
Ron

hi ron,private message sent regard tony

quote:

Originally posted by tony6810:
hi ron,private message sent regard tony

PM sent!


Thanks,
Ron

List updated!

Ron

No door glass? I would like to replace my side glass as they are badly scratched.

By updated do you mean sold items have been deleted or new items added?

quote:

Originally posted by Husker:
By updated do you mean sold items have been deleted or new items added?

Sold items and sale pending items have been marked.
I will erase the sold items next.

Ron

Ron,

Did you see my PM? I'll take one of each of the rear lower control arms and the 2 pipes mentioned.

Dan Jones

quote:

Originally posted by Daniel_Jones:
Ron,

Did you see my PM? I'll take one of each of the rear lower control arms and the 2 pipes mentioned.

Dan Jones

PM sent.
Sorry Dan.



ROn

Also remember I need a final figure & your mailing address (fuel sender). Can PM me on that.

Thanks,

Lee

quote:

Originally posted by Buttondoor:
Also remember I need a final figure & your mailing address (fuel sender). Can PM me on that.

Thanks,

Lee

PM sent!


ROn

List updated again.


Ron

Ron,

Did you get my PM response?

Julian

hi ron ,
i have a list of parts am interested in will pm this list . thanks wade

I think I have PM'd all that have replied.
Please let me know if I missed anybody.

Thanks,
Ron

Ron,

PM sent earlier...

Ron,
thanks for your prompt replies and help with these bits and pieces, which will be a great help.

regards
Peter

quote:

Originally posted by Corey Price:
Ron,

PM sent earlier...

PM sent.

Ron

PM sent again.

Another PM from me !

Kristian

quote:

Originally posted by Push1267:
Another PM from me !

Kristian

Replied!

Ron,

Sent you another PM. Thanks.

quote:

Originally posted by Garvino:
Ron,

Sent you another PM. Thanks.

Replied.

ROn

Once again - PM.

hi ron ,i sent you a pm

Ron,

A PM was sent to you...

PMs sent!

ROn

Ron,

I sent a PM a couple days ago. Let me know if you did not receive it. Thanks.

pm sent

PMs sent!
If anyone hasn't recieved a reply from me ,I'm sorry I have been completely swamped with work lately.
Please send me another PM or email me at rfmccall@comcast.net

Thanks,
Ron

E mail sent.
Thanks,
Dan

Hi Ron

Would you have motor mounts ?

Thanks Dan

Yes. I have the aluminum parts of the motor mounts.

Ron

hi ron ,pm sent cheers tony

quote:

Originally posted by tony6810:
hi ron ,pm sent cheers tony

PM sent!

Ron - Still have headlight buckets? If so which ones, what condition and how much? Send email to: clewis@dmn.net

quote:

Originally posted by DJEZC:
Ron - Still have headlight buckets? If so which ones, what condition and how much? Send email to: clewis@dmn.net

Email sent!


Thanks,
Ron

quote:

Originally posted by tony6810:
hi ron ,pm sent cheers tony

PM sent!

Thanks,
Ron

Ron, still have the door handles? Sent an email a while ago and no reply.
Richard

Richard. I am sure that I replied to you.
I don't have the door handles. Sorry.I got rid of them a while ago.
The only door handle that I have left is an inside left handle.

Ron

i think i can use a left side inside door handle. how much do you need for it. thanks, mike mayberry

quote:

Originally posted by king:
i think i can use a left side inside door handle. how much do you need for it. thanks, mike mayberry

Not sure. Make me an offer?

Ron

Ron, PM sent...

i bought a right side for $25. so i assume the left side is worth the same. i can use paypal if you want. thanks, mike mayberry....

quote:

Originally posted by king:
i bought a right side for $25. so i assume the left side is worth the same. i can use paypal if you want. thanks, mike mayberry....

That works.
$5.20 for shipping. PP account is rfmccall@comcast.net
Thanks,
Ron

quote:

Originally posted by Corey Price:
Ron, PM sent...

PM sent!

ron, thanks and the money will be in your paypal account this morning...mike mayberry

do you have an engine cover , either flat or raised - i prefer raised but can modify a flat one if necessary

Ron:

I could use a decent 7" wheel for a spare.

HEF

I am looking for a right and a left spindle arm if you have them. Mine were modified and I think it would be easier to see if I can find new ones rather than trying to fix these. The arms are the part that mounts the caliper at one end and the tie rod at the other.

Thanks!

Ron,

I sent you a PM.

Steve

looking for motor mounts and headers
Would you have them ?

Thanks Dan

I have the aluminum parts of the motor mounts. The only thing that I don't have is the rubber isolators.
I have no headers.


Ron

Throttled, exactly WHAT was modified on your steering arms? Did someone drill out the tapered holes to run heim-joints in place of tie-rod ends? Those arms are forged steel and can safely be welded up and redrilled, then taper-reamed to restore the stock function. By a good welder, of course. Bent arms can likewise be straightened by someone familiar with crash damage repairs.

Hi Ron

How much would you like to get for them ?

Thanks Dan

quote:

Originally posted by Dany97:
Hi Ron

How much would you like to get for them ?

Thanks Dan

PM sent.
ROn

Ron-

Do you still have the York AC compressor? I am contemplating doing the Kirk Evans bulkhead reduction kit, but am not ready to spend $$ on a new AC system, so I really just need a "placeholder" for the drive belts on relocated alternator. If so, what is your price shipped to NJ 07039?

Thanks

Swen

I could be mistaken but I recall that the York only has a single sheave pulley and if so would not work to run the alternator. You could get a used sanden style pretty cheaply I would guess.
Good luck,
Forest

quote:

I could be mistaken but I recall that the York only has a single sheave pulley

The York a/c compressor has a double sheave pulley.

John

quote:

Do you still have the York AC compressor?

Swen,

I have one if Ron doesn't. PM me if you need it.

John

I have a york compressor you can have it. These thing are starting to stack up like chord wood LOL

Ron,

Would happen to have a set of clutch and brake pedal springs? I'm replacing both.

Also, do you have the 4 bushings (P/N 04004A) for the pedal shaft in the Pedal Support Bracket (Ref P/N 04019A)?

Thanks

Sorry Steve. I don't .


Ron

Hey Ron, just got my L back from the bodyshop and I can't find the rear bumper shocks or the u shaped brackets that go with them. Can you help?

Rob

quote:

Originally posted by HEF:
Hey Ron, just got my L back from the bodyshop and I can't find the rear bumper shocks or the u shaped brackets that go with them. Can you help?

Rob

Sorry. I can't .

ROn

Ron:

Do you have the aluminum insert that goes throught the firewall to hold the pedals? I broke an ear on mine this weekend.

Thanks:

Rob

quote:

Originally posted by HEF:
Ron:

Do you have the aluminum insert that goes throught the firewall to hold the pedals? I broke an ear on mine this weekend.

Thanks:

Rob

I had one but I have since sold it. Sorry.


Ron

Ron do you have some decent looking ac vents for an L car?

If so how mucho do you want for them?

What number can you be reached at?

Chris Lewis

Ron,

I am looking for the following parts for my 1974 Pantera L:

-Radiator temp sensors, both
-Overflow tank
-Spindle nut washer, 01016A
-Shock bushing eyes (qty of 4)
-Speedo cable
-Shift rod, rear (front) section, 06008A
-Connector, shift rod adjusting, 06005A
-Shift rod, rear section, 06007A
-Nut (jamb) shift rod con LH, 06004A
-Nut (jamb) shift rod con RH, 06006A
-Knob, seat track adj, 25045A
-License plate light, 16026B
-Windshield wiper cowl cover, driver's side

Please let me know if you have these items for sale. Feel free to PM me. Thanks.

Matt