Pushbutton 2 spoke Ferrero steeringwheel hub

That Wheel has a very odd PCD, pitch circle diameter, 75 mm.

I found a standard 74 mm adapter can be used successfully if you drill out the holes just a very little bit. The screws will not sit completely flush, but the mismatch will not be noticed by anybody.

Larry

Simon,

Here's a 75mm PCD to Momo adapter. The only issue is, it uses 6mm bolts for the steering wheel whereas the Ferrero wheel uses 5mm bolts. I solved the problem with 5mm helicoils. Also, the adapter to Momo hub hardware that comes with the adapter is absolute junk. Don't even try to use it!   

https://www.ebay.com/itm/162330099022

I can't take credit for finding this adapter. I thank Larry for that!

David and Larry, thanks for the help,

also was looking for a original Ghia Hornbutton.

I just notice there are nice reproduced Ferrero 2 spoke steering wheels for sale

regards

Simon

Simon,

I have one of the reproduction Ferrero 2 spoke wheels. The anodized aluminum spokes are perfect but the leather and stitching isn't quite as good as what you'd find on a Momo. Some might say it looks more "hand made" than a Momo.

David,

Is that the 360 mm Ferrero wheel from Italy €240 +vat ?

Simon

Simon,

Yes, that's it.

Can you still buy a new production Momo splined and tapered hub that correctly fits our steering shaft?

Larry

The appropriate hub, manufactured by Momo, has not been available for decades. Aftermarket, Pantera specific hubs, drilled in the Momo bolt pattern, appear to be available but don't ask me where or from who?

The only currently available splined and tapered hub that I know of is the one manufactured by and sold by Norm at Teamblitz, a Ford Capri specialty vendor

it provides the first building block and requires the appropriate three hole to six hole, three hole to nine hole and other wheel patterns

he also sells just about all the standard brands of steering wheels and can provide the necessary three hole adapters to mate with his splined hub.

this grant adapter is out of production, but the one made by teamblitz is dimensionally the same.

Larry and David, thanks again.

Simon

Found the right hub ; brand  Luisi  part nr. 2703, 2 bolt patterns .

also on Ebay USA  $ 70-80 each, sorry but have a problem with posting a link.

Simon

Larry or David , long time ago you send me a link for a reproduced ( VW ?)  Ghia hornbutton .

That time I bought one, now I need another one too, does one of you where to buy ?

I know an original PB Ghia is hard to find , but if you knows one please let me know.

Thanks

regards

Simon

Simon,

That must have been Larry!