Skip to main content

Replies sorted oldest to newest

I haven't seen exactly what you're looking for, but Mercedes and VW had spare tire tool boxes. You might check your local wrecking yard or ebay for a Mercedes box, or you can order a reproduction VW box to cut up and create your own molded socket/ratchet insert. These boxes were used in Porsche 356's as well.

VW Round Box Toolbox
$218 http://www.socalautoparts.com/...cludes-tools-p-16651
$129 http://www.piersideparts.net/MB15-2016.html






Pre-94 Mercedes 500E version:




Here's one on ebay - $90 BIN:
http://www.ebay.com/itm/MERCED...600SEL-/161576700892


Frankly, it just looks like a styrofoam insert. I imagine you could go down to TAP Plastics and pick up some kind of foam/polyurethane molding kit and make your own insert (pour into a cake pan of the right diameter, cover with plastic wrap, and start sticking your sockets and ratchets in any layout you desire).

The Hyundai Elantra uses a molded spare tire insert to hold the jack and associated tools. Again, carve it out and make your own insert. $239 new - ebay or your local wrecking yard would be the place to start.
http://www.hyundaishop.com/hyu...e-tire-kit-j074.aspx


Saab had a similar molded spare tire insert for their jack and tools as well - this one was for sale for $40 on a Saab forum a few years ago.


Looks like the Honda Civic Si had a similar spare tire molded jack & tool kit.
http://www.ebay.com/itm/2006-0...%26sd%3D301233262902

VW Passat Molded Spare Tire Tool Kit - $47
http://carparts4sale.com/trunk...-lug-wrench-cp029759


Generic Round home tool kit - $69
Throw out some of those crappy home tools and dump your favorite socket set in there!
http://www.hsn.com/products/ti...2SgMwCFa8W0wodkTwCpQ
Well, sure, those are what created the idea?
Unfortunately I don't have the ability to vacuum mold them.

The answer is it probably is only a matter of time before someone sees the opportunity to market them? Maybe next week?

Better yet, if you are going to dump the spare tire that goes in the molded in spot in the trunk tray, then the empty spot yearns for something to fit in it?

Extrapolating on the above thoughts is what I'm doing and presuming that someone else has beat me to the punch but I haven't found their product yet?

That location seems like a logical location to put a tool box to me? Especially with a DT logo on the top?

As far as what you posted, I would only go for the hat box if it was pink. Maybe purple?
Last edited by panteradoug

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×