Skip to main content

Closed1 reply

sorry

G Guest
sorry about the last message... i pressed a wrong button and sent it by mistake. anyway i have koni adjustables on the car and i was wonder if anyone has ever had this problem with rear wheel alignment and what i should do to correct it. when i go over bumps the wheel actually hits the rear quarter!!
thanks guys
Original Post
bosswrenchbosswrenchMember
If your rear wheel is moving THAT much, you probably have a severely worn outer stub-axle. The stock axles are mild steel and were slightly undersized from the factory, so the wheel bearing races wear the axle. As the axle is hollow, it is very possible to break the axle in half! The car should be instantly taken to a knowlegable Pantera guy (shop or not) and carefully inspected before you have a catastrophic accident! What area of the country are you in?
Views: 79
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×