I received the turn signal switch today and it looks perfect. Well made, connector the same as original.
Thanks for the update. Good to know it is a true plug-and-play replacement part.
Larry
Good to know. Please report back once installed.
Tom
Clean the earth points on both the rear lights both on the body and the light cases. Make sure the spade connections ae sound. You can get this cross circuit effect through bad earths that have slowly deteriorated.
Also the turn indicator stalk assembly looks pretty well the same as the one that was fitted to the 70's Ford UK Cortina which crop up occasionally.
It may have a close cousin that was installed on Cortina‘s, i’m not quite sure.
but I am quite sure the steering column is in fact a MK1 UK Capri steering column including the turn signal stalk and the ignition lock assembly.
To allow the column to be used in the Pantera, DeTomaso actually removed about a 12 inch section of the steering shaft and then welded together the top and bottom sections.
Larry
Thank you both foe your input. Should have everything back together next week and will revert with outcome
Thanks Larry - I did not know about the Capri connection. Very interesting !