wanted Price on front grill, sept 72 P car

Here you go:

http://www.ebay.com/itm/DETOMA..._Accessories&vxp=mtr

only 1 day left.

thanks, but what about the surround for it, need a complete one!

The original front grill (and the rear one) are really ugly looking pieces. They just can not have any other value except originality. Making the same quality but new ones requires drinking 1-2 wine bottles first. After saying all this, I will actually put the original grills back to my car, as there is something really rough in them.

thanks but not much help that?

Chris, since since no one answered your requests for all the small stuff you're missing, your best bet is to call/e-mail one of the U.S. Pantera vendors who have parted out a Pantera similar to yours, and make a package deal. It also appears you don't have the extensive current listing of Pantera suppliers so send me a post off-line with your e-mail and I'll send you a pdf of all of them.
Most of the take-offs from wrecked cars are quite useable and often cost 1/4 (or less) than NOS, but you'll likely need to do some cleaning. Even that's not much of a problem since most of the shiny parts were stainless steel and buff up nicely. Shipping 'old, used car parts' to NZ will slide thru Customs less painfully than NOS, too.
Here are a few e-mail adresses of parts vendors that I know have scrapped Panteras right now:
larryS@panteraparts.com
steve@panterasbywilkinson.com
www.extremepanteras@hotmail.com
www.DRBProFormance.com
I'd heard that PI Motorsports was sold a month or so ago and Jerry Sackett is no longer operating it; dunno if anyone there is currently answering e-mails but you can also try www.pim.com, too. Good luck.

I think I might have a spare one around, I'll have to check that parts stash. If I do it's the later black, I think early ones were chrome/stainless.

Julian

Chris.
I don't have a grill, but I do have a lot of other Pantera parts that I have removed from my car.

Such as:
window motors.
Headlight motor
oil pressure gauge
water temp gauge
Amp gauge
fuel gauge
original coolant pipes
LHD rack & pinion
Steering column unis & shaft
Upper steering column
Pedal box assembly
Rear universal joint driveshafts
Front disc rotors, (mint cond)
Front calipers, (mint cond with brand new EBC brake pads).
Rear calipers.
Brake booster.
72' complete LHD dash.
Top front suspension arms.

I also have a mould to make RHD 73' dash units.

Plus lots of other bits.
Send me an email if theres anything you need & I will let you know if I have it.

Email: tony@edge.au.com

regards,
Tony.

Hi Julian, a blck one would be fine as that is what i need. if you ahve one, could i see a pic and how much do you require for it.

cheers Chris

quote:

Originally posted by Joules5:
I think I might have a spare one around, I'll have to check that parts stash. If I do it's the later black, I think early ones were chrome/stainless.

Julian