351C complete motor ...

accobraMember

Anyone have any interest in a complete motor 351C D2AE-CA 4 bolt mains B3ZE heads and a torker intake. Heads were just rebuilt, new cam and bearings ... the motor only had 5000k miles on it ... I removed it to freshened it up .. with intention of using it and decided to build an entirley new motor .. So this one is for sale .. not sure what its worth .. but willing to take offers. ..Oh the pulleys and AC Bracket is not included.

Ron

Attachments

Hide

Images (1)

4/14/095:30 PM

❤️ 0

Original Post

Replies sorted oldest to newest

markcharltonOld enough to know better and still young enough not to care. My '71 Pantera

Hi Ron,

Was the motor re-built as stock, or did you do anything fancy inside?

Mark

4/15/0912:51 PM

❤️ 0

accobraMember

The motor was rebuilt as stock by someone else before I purchased the car they stated and appears correct about 5k miles ago. When I removed the heads there was no ridge on the cylinder walls and they still had a trace of the cross hatching from a hone, I pulled one cap and the bearing looked new. I could pull a head and check the bore .. it appeared to have after market flat tops and if I remember correctly .030 over sized. The motor ran very strong. High Perf in the motor is limited to the Comp Cam FC268H-10 and the torker intake .. the aluminum water pump goes with it ... shipping I will pallet it up and ship it airport to airport via FOWARD AIR.

4/15/092:36 PM

❤️ 0

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...