7/16-14 Rocker arm studs

Hello Mike; Hope this helps!...Mark

http://torquespecs.tripod.com/hi_po_ford.htm

70 to 75 ft/lbs

Sticky #3 in the engine section has a bolt torqueing chart (all sourced from Ford documentation).

Thank you both. I finally found it earlier today. My 73 Pantera service manual calls it out to be the 5/16-18 bolts at 18-25 ft. lb.
Finish getting 6336 back together this week, start work again in the fall.

quote:

Originally posted by MarauderMike:
Thank you both. I finally found it earlier today. My 73 Pantera service manual calls it out to be the 5/16-18 bolts at 18-25 ft. lb.
Finish getting 6336 back together this week, start work again in the fall.

Hello Mike; The "5/16-18 bolts at 18-25 ft. lb" is NOT the torque spec for a "Rocker Arm Stud Bolt", as your 73 DeTomaso Pantera engine has "Pedestal Mounted Rockers " IF the valve train is STOCK!...2 entirely DIFFERENT functioning parts...Mark