#7041 GTS

UFO-LOW
It's difficult to source parts for these. I was lucky to find a few pieces on ebay...like the "star" adjusting knobs and the round covers for these. Switches come available on occasion and almost impossible to find the blank switch cover (had to make sure my mod was precise as I only had one shot at it!). Leather is of my own choice and not original Recaro.

Can you post some pics of the new seat tracks and mounting brakets

Working on that right now. should have fabbed in the next couple of weeks.

I really do think you need to consider keeping the orange inserts.

Those actually look really cool in s '70s kind of way...

(You would want to clean them up a little)....

Rocky

Hey John -

I found this for you. It doesn't mention the option for the candy apple red finish, but....

From: PI News Winter 1984 Vol 11 No 2

Adding a Thermotion electronic valve to 7041. I know this has been done, but I am doing the activation a little different.

I bought a 10kOhm slide potentiometer to control the valve.

I drilled 4 small holes for the potentiometer tabs to fit into.

I mounted the pot. into the holes on the inside of heater control box. I bent the 4 tabs to secure the pot.

Confirmed full slide of pot. with valve control arm.

drilled small notch in control arm to keep retaining spring from sliding. I can now have the valve in the engine bay (and remove the interior mechanical one) without changing the original appearance.