Hey, how about this one? It’s Ford OEM and it’s not ugly!
Has Wilkerson got a hub adapter for that one?
joea posted:
depends on the colour of the horse its attached too.
lf-tp2511 posted:My Ghia center
Is this an original horn button? Or is it a side emblem you placed in there? Thanks Ed
I’m trying to find an original that can be scanned into photoshop and then I can make an embossed sticker from that. :-) I have a two spoke but missing the horn button.
Have this as a quick release. 
That horn button sets off my OCDness (it's not level).
momo
Attachments
Images (1)
I think this is the GTS Steering Wheel
looking for a Pantera Ferrero steering wheel, hub and horn button.
please let me know what you have
Finding a genuine Pantera Ferrero Wheel will be very very very difficult. Your best option is to seek out the similar model Ferrero Wheel used on other autos. It may not have the proper lettering as found on the Pantera version, though.
finding the correct Ghia horn button will be more difficult than finding the steering wheel. I don’t believe I have ever seen a correct one offered for sale. I was able to locate an acceptable Ghia emblem and adapted it to a generic horn button for a close but not OEM correct look.
this is a correct OEM horn button
this is my creation 😕😕
locating a hub will be a little bit easier if you can find a hub designed for our capri column. They are not very common. For some reason the Ferrero Wheel uses a 75 mm PCD bolt pattern. The closest you will be able to find will be 74 mm PCD. I found if you oversize the six mounting holes of the wheel, an acceptable mating can be accomplished.
this is currently on eBay italy
Larry
Attachments
Larry, I will accept your ,, creation" of the horn button.
for me it looks very good.
regards
Simon
Larry, since the 74mm hub’s bolts are offset by 15 degrees, compared to the 75mm hub’s bolts, does the turn signal still cancel normally? Rather than enlarge the holes in the Ferraro wheel, why not just use a Ferraro to MOMO adapter?
David,
your photo failed to display
I have never seen any adapter offered with the Ferrero 75 mm PCD.
The two spoke I purchased from Europe many years ago was still mounted to the Lancia OEM hub.
as Dennis Q had adapted a Grant removable security key-locked hub to 2511 for the LeCarra Wheel, I wanted the two spoke to be interchangeable with the LeCarra.
The grant security lock is designed for their proprietary three bolt PCD wheels, so I purchased a second security lock (just to obtain the removable wheel-attached portion) and the appropriate three hole to six hole 74 mm PCD adapter.
The conversion done by Dennis used a no-longer-made capri three hole hub adapter made years ago by Grant, so signal canceling is not an issue with this assembly.
Larry
