Throw out Bearing Part Number

from SOBill's list

Throwout bearing PN 1625-12 BCA for Pantera

cheap, rotten, made in Mexico, Federal Mogul # 1625-T, throwout bearing

BCA-Federal Mogul part number 1625T heavy duty ("T") clutch release bearing

Other than that, I know nothing

Larry (Schultz knew what he was doing)

And don't forget to install a new oilite bronze pilot bushing from Marlin Jack
http://pantera.infopop.cc/eve/forums/a/tpc/f/9550045562...450074664#6450074664

Cheers!
Garth

I have a BCA Federal Mogul 1625.
No "T"... Do I have the right part. Also, what is a constant run throwout bearing? And I'm assuming when I put it in I want to a little gap so it's not in constant contact?

Hm. Some searching found that there's definitely 2 different products. On one website FM1625 for around $20 and FM1625T for around $30. Can't find any pictures though. Need advice soon. The weekend is almost here!
thanks Rick

I have a brand new one from a vendor that says..1625-12 FM-MEX
Is this the right one? It looks cheap, but I'm no expert.
Will

I went with the 1625-T. Same as the one I took out. Hopefully I will put my transaxle back in next weekend. Its been over a month of down time....I am going through withdrawals of not having my Pantera to drive!

fyi
BCA Part # 1625 {Ball Bearing Bore=1.6255" Outer Diameter=3.0625" Width=0.687"}
Bearing Only; (Std. Clutch) (Thru 10" Disc)

BCA Part # 1625T {Ball Bearing Bore=1.6255" Outer Diameter=3.0625" Width=0.687"}
Bearing Only; (H/D Clutch) (From 10.4" Disc)

It would be nice if RB chimmed in with his recommendations.
thanks Rick

Hogan!

quote:

Originally posted by george pence:

There is a fellow selling a throwout bearing on ebay and states it is for a Centerforce style and not a 3 finger type. I didn't think there was a difference. Is there?

http://cgi.ebay.com/ebaymotors/DeTomaso-Pantera-Clutch-...mZ150102147897QQrdZ1