Having a hard time locating dash vents for a 73, the ones that sit on top of the dash.
Was thinking about having them made with by a 3D printer service.
anyone use such a service?, would probably be cheaper to run a dozen, than just the 2 I need.
Thoughts?

Original Post
If you get them printed make sure the company doing the printing provides some information on the material.

Make sure it is UV stable and can handle the interior temp of the sun load on the dash. Sounds silly on the temp, but some of these 3D materials will only hold dimension to about 110 F.
I have been doing a quite a bit of 3d printing. There is a wide variety of what people can do 3-d printing. I am surprised how how difficult some things can be. While it seems to be a good solution for one off individual items, Making things for consumption can be a bit difficult. Some things don't print well. The surface is often less than....production quality. The plastics often not appropriate.

Often the part needs more hands on attention to get right than some realize. Once the part is made a mold can be made. With a mold, a part can be casted of different materials. LOTS of opportunities!!:



It was about $2500 (1/2 for computer scan/work on original vent and 1/2 for actual printing of 10 vents).

I now have the program so they are 1/2 price from now on! :-)
As an aside, these were ALSO Ford pieces that are not available as individual pieces.

Add Reply

Likes (0)
Post
×
×
×
×