Fuel pump is shot. No marking on it (perhaps filed off pre-chroming?).  If not made anymore (which is likely), what would be the best replacement?  Current fuel lines appear to be 5/16, but appears most newer pumps are at least 3/8, so I assume all the fuel lines will need to be replaced as well. Thank you as always for the advice in advance. 

 

F4EBB393-E5EA-4A97-A573-8DBA99E1D4D0

Attachments

Photos (1)
Original Post

The chrome pump is most likely a Holley fuel pump (manufactured "off-shore", re-branded by Holley).

My recommendation up to 425 bhp is a stock replacement manufactured by Carter, p.n. M6882. More than 425 bhp I recommend the smaller of the two RobbMc fuel pumps (p.n. 1020).

fuel system

Attachments

Photos (1)

Thanks for all the replys. Given other threads have mentioned how tight the fit is does anyone have any pictures of their set up and the best fittings to use?  RobbMc specifically says not to use 90 degree fittings...which is how my current pump is set up. Would love to see how you clear it all with straight fittings!

Add Reply

Likes (0)
Post
×
×
×
×