Skip to main content

I am wondering if anyone can shed any history on Pantera 4621, a righthand drive UK registered car (VNP653L) of 1973.

I have owned the car since 2012 and have spent most of that time "recommissioning" the car for road use. When I bought it the car had been off the road for about 25 years and was basically "in boxes".

I say recommissioning, as opposed to "restoring" as the car was substantially modified in its earlier life and is far from original. Obvious changes include a wide body "kit" and bundle-of-snakes exhaust, but less obvious are removal of air conditioning and replacing with an oil cooling radiator, relocation of the fuel tank to the front hood space, dual circuit braking and a multitude of engine and suspension mods.

All I know about the history of the car is that it was owned in the 1970's by a Mr Richard Eggington in Warwickshire and (at some time in his ownership) was registered RPE3. I understand that he participated in some form of Motorsports with it and that this accounts for many of the modifications. Certainly when I bought it the engine had a racing camshaft, lightened flywheel and competition clutch. These caused no end of issues for road use and have  since been changed, along with a new carb, inlet manifold conversion back to hydraulic tappets and a new electronic ignition system.

I believe the car was also painted yellow (traces remained in the central tunnel); it is now red.

I should like to try and learn a little more about the car's early history - in particular of its competitive use and hence why it was modified. I should be delighted if anyone "out there" knows anything about it and could tell me.

The "good news" is that the car is back on the road and, after some heartache, works well and is reliable. I wouldn't say I use it a lot but it does get a few outings to the seaside (Cleethorpes) and usually wakes everyone up when it does so (having the absolute minimum of exhaust silencing!).

Many thanks for your time in reading this and, hopefully, posting some information if you know anything that would help me.

Good wishes .... Murray Reid. Lincolnshire Wolds. England.

Some pictures, before and after ...

Front, as acquired. Pop up lights had been removed, these four sealed beams inserted into the front profile and air scoops let in to the front hood. I didn't like this!


Front Now. Pop ups replaced - not original I know (they are electric motored and ex Toyota MR2) but I think they look better. Two inches cut out of the air dam all round to raise the splitter to a sensible height for the road.


Interior as acquired. Not much to go on!


Interior Now

New Interior

Engine Bay: note the absence of the fuel tank - it's in the front.





Images (7)
  • Front
  • Interior as acquired: Interior as acquired
  • New Interior: Interior as rebuilt. All new.
  • Rear: Rear
  • P1010008
  • P1030357
  • P1050399
Original Post

Replies sorted oldest to newest

The seats are from a Ford Sierra Cosworth, but re-foamed thinner by about an inch and a half as the originals were to thick and brought my head too near the windscreen header. I made up the seat runners from components available here in the UK from a firm called "Carbuilders"; fortunately the floorpans had already been lowered in the seatwells - presumably to allow the driver to wear a crash helmet inside!

I am lucky to have a "friend" who in a previous "life" made the fiberglass molds for TVR Cars in Blackpool. He made the molds for the dash and centre console and did all the fiberglassing for the front end. I know that the centre console doesn't use the correct switchgear but I wanted to incorporate some additional switching (eg a manual override control for the electric radiator fan) and keep the main dash clear of extra switches. I chose to use the toggle switches instead of the DeTomaso rocking switches as they took up too much space.

Interior 1 24th Feb 16Interior 3 24th Feb 16


Images (2)
  • Interior 3 24th Feb 16
  • Interior 1 24th Feb 16

The inside finish is superb. If mine comes up half as well I would be delighted.

I have the original dash , in excellent  condition , the center console , battered and in poor condition and what I think are the original factory option recaro seats . The are a little worn , a few ciggie marks , but hell - it was the 70'S!

The carpets have been binned as no good to man or beast. I got some new replacements from Halls but was a bit disappointed that the some of the edging  trim was already coming loose when I installed them . They would replace but I have to ship back the defective bit which will cost more to ship back to the US from Aus than its worth. Very disappointing quality. Trying to have the edge  resewn properly locally.

I am tracking down  some matching fabric to  recover the seats but low on the list at the moment.

More to this interior stuff than meets the eye !

Add Reply

Link copied to your clipboard.