I'm looking for advice in installing an oil cooler for my ZF.
Mark
Original Post
Replies sorted oldest to newest
quote:Originally posted by Push1267:
I'm interested as well.
Sometimes (that's what I have seen and will consider doing for my car) an electric pump is used that pull oil from the speedo gear hole, though the pump and back through a pipe in the casing just over the ring and pinion, such that the rings gears are cooled directly (that must be the thinking). That of course, means drilling the case and welding a fitting to it.
quote:Originally posted by ehpantera:
I'm looking for advice in installing an oil cooler for my ZF.
Mark
quote:Originally posted by ehpantera:
I don't have a temp reading but you can't put your hand on it.
quote:Originally posted by JFB #05177:quote:Originally posted by ehpantera:
I don't have a temp reading but you can't put your hand on it.
I have found this method pretty acccurated. If I can monetarly touch twice and have no problem doing a third touch, the temp is under 160F.
(method used to determine if water is hot enough to scald a hog)
quote:Originally posted by ehpantera:
I promise to get a specific reading in Sept. after SSCC.