Still working on the front of the car. This is the underside of upper part of the front panel latch crossmember. WTF!! I surely hope that the person who left it like this had the intension to finish it properly?

Attachments

Images (1)
No time to celebrate - moving on to the driver side center structure - need to fit and install the outer rocker. First some trimming of the b-piller and experimenting with adding strengthening and wenting holes on the rear part of center rocker and b-piller.

Attachments

Images (1)
Got in some time the last couple of days of the holidays.

Worked on fitting the front fenders. I have one NOS passenger side fender and a new driver side topfender. The Hood is also a NOS GT5 Hood with stamped went holes

Attachments

Images (1)
Last edited by push1267
This may look easy, but it takes an incredible amount of time to make sure everything fit and align as good as possible

Attachments

Images (1)
Continued Work on the driver side outer B-post skin. In place - fits with small adjustments only (thanks Johnny)

Attachments

Images (1)
What an amazing reconstruction thread.

Skill level is amazing.

It would be fantastic if some of those awesome parts could be produced for sale to others.
.
Hi Push,
Looking good man.

"This may look easy, but it takes an incredible amount of time to make sure everything fit and align as good as possible"

You said it man...!! It's amazing how long it takes to make it right. And it looks like you are getting it right! Congrats on the progress. Thumbs Up!
Thanks for comments and yes, the outer B-post skins are from Johnny. As mentioned earlier they are a beautiful and easy fit(compared to all the other Work I've done on this car). So thanks Johnny.

Here I fitted the passenger side B-post skin

Attachments

Images (1)
Experimenting with the fender. Needs quite a lot of twisting and mingling, but will fit eventually. Also need to get the decklid and the other fender in place for alignment before welding

Attachments

Images (1)
I've started to accumulate the parts I need to finish the chassis for the painter. That included the gr4 flares, aluminum door skins, the roll Cage and the WHEELS.



Here are the Wheels - a set of 10 and 14 inch Gr4 Wheels !!! Crazy stuff. I need those (and tires) to set the fender flares.

Attachments

Images (1)
Last edited by push1267
A Little bit of Progress over the last couple of weeks. Had to repair the driverside rear fender. Upper rear corner

Attachments

Images (1)

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×