Just some updated photos:

It's looking good Gary. Are you doing way with your rear quarter window? That's my favourite part of the car.
Looks like your planning on some big hood vents.. Keep the pictures coming.

Johnny

quote:

Originally posted by Johnny Woods:
It's looking good Gary. Are you doing way with your rear quarter window? That's my favourite part of the car.
Looks like your planning on some big hood vents.. Keep the pictures coming.

Johnny

At this point I am planning on making my own intake ducts for the side window. Not sure if they will e aluminum or fiberglass. Probably fiberglass. The oil cooler and oil accumulator will be on the left so I will duct air in for that. I am going to build the gas tank on the right.

There will be a large hood vent in the front. Probably like the EX3 Pantera. The plan is to build the hood from scratch out of aluminum. Then when I give up on it to go buy a carbon fibre hood.

I am slow. Hopefully I can get a free weekend soon to get more done. Here is the mount for the roll bar. Much to do to it still:

wow,lots of work, a question please, is the roll bar custom built or from a vendor? if a vendor, which one please.

thanks

nazgul

The vendor is GARY IN INDIANA !!! LOL

Yes that's Gary who is in Southern Indiana not to be confused with "Gary Indiana" which is in northern Indiana.

Nazgul, I am making it myself. If you look at the first post here, the car is upside down with a cardboard template. I used that to determine how I wanted to make the shape.

The plates were built from 3/16" steel plate. They will have steel tubes welded through the frame with plates on the bottom as well.

The tubes were Tig welded.

I have a lot more more tubes to add.

Gary

More:

More:

I could be way off base here but I have to ask... The bar that runs across that you could mount seatbelts too. To me it looks to low. I don't see how you could remove or install the center firewall cover. By the way it looks I would have to think your not putting the rear inter firewall cover back on.